hardware components

05.23 Hasyim Asyari 1 Comments

• Computer cases are either desktop or tower models.
• The desktop model sits on a desk horizontally. The monitor can be set on top.
• The tower model stands upright in a vertical position that allows easy placement on the floor.
• Mini-tower, mid-tower, and full tower cases are available.
• A power supply provides the needed voltage to power the various electronic circuits that make up the PC.

• A power supply provides the needed voltage to power the various electronic circuits that make up the PC.
• It receives external power and AC electricity.
• It is contained in a metal box. Within this box, a transformer converts the current that is generated from standard outlets into voltages and current flows that the computer parts need to operate.
• A fan installed in the power supply prevents the computer and its components from overheating by maintaining an air flow.

• The power supply fan helps prevent the computer components from overheating by maintaining airflow in the case.
• A heat sink is made of a material that absorbs generated heat. It is designed to disperse the heat away from the CPU
• Computer cases made of aluminum create a much cooler environment for the installed components.
• Liquid cooled cases new. They introduce water as a cooling agent. Liquid cooling units fit most cases that have a place to mount a back exhaust fan.

• Everything else in the system plugs into it, is controlled by it, and depends on it to communicate with other devices on the system.
• The system board is the largest of the printed circuit boards and every system has one.
• It houses the CPU, the controller circuitry, the bus, RAM, expansion slots for additional boards, and ports for external devices.
• The motherboard chipset determines the motherboard’s compatibility with several other vital system components.
• It consists of a group of microcircuits contained on several integrated chips or combined into one or two very large scale integration (VLSI) integrated chips.
• These are chips that have over 20,000 circuits.
• The motherboard chipset determines motherboard performance and limitations.

• Most new systems come with the ATX motherboard form factor.
• Motherboards are usually described by their form factors. Form factors describe the physical dimensions of the motherboard. The two most common form factors currently in use are the Baby AT motherboard and the ATX motherboard.

• The components found on a motherboard can vary depending on its age and level of integration.
• Some motherboards will have more or fewer chips or devices on board.
• These are the most common items found on a typical modern motherboard.

• Often referred to as the brains of a computer, the CPU contains two basic components
• Control unit – Instructs the rest of the computer system on how to follow a program instructions.
• Arithmetic/Logic Unit (ALU) – The ALU performs both arithmetic and logical operations. Arithmetic operations are fundamental math operations.
• The processor handles most of the operations that are required of the computer by processing instructions and sending signals out, checking for connectivity, and ensuring that operations and hardware are functioning properly.
• It acts as a messenger to major components such as RAM, the monitor, and disk drives.
• Terminology like socket 7, socket 370, socket 423, or Slot1, will frequently be encountered.
• Socket X (X being any numerical number) is a descriptive term for the way certain processors plug into a computer motherboard so that it makes contact with the motherboard's built-in circuitry or data bus.
• Slot-type processors had a very brief lifespan (just about a year in the market).
• Intel for its Pentium II processor moved from the socket configuration to a processor packaged in a cartridge that fits into a slot in the motherboard.
• The current family of the Intel Pentium microprocessors includes the Pentium II, III, IV and Xeon.
• The Pentium class is the current standard for processor chips. Improvements in processor speeds allow the components to get data in and out of the chip quicker.
• The best performing AMD processors are the Athlon, Thunderbird and Duron series.
• They are currently the most used microprocessors, along side the Intel Pentium IIIs.
• CPU descriptions as Pentium 133, Pentium 166, or Pentium 200 are well known. These numbers are specifications that indicate the maximum (reliable) operating speed at which the CPU can execute instructions.
• The CPU speed is not controlled by the microprocessor itself, but by an external clock located on the motherboard. The speed of the processor is determined by the frequency of the clock signal.
• Three factors determine how much information can be processed at any given time:
• The size of the internal bus
• The size of the address bus
• The processor's speed ratings

• Read only memory (ROM) chips, located on the motherboard, contain instructions that can be directly accessed by the microprocessor.
• Data transfer from ROM is faster than any disk, but slower than RAM.
• Some examples of ROM chips that can be found on the motherboard include BIOS ROM, electrically erasable programmable read-only memory (EEPROM), and Flash ROM.
• The instructions and data in the ROM chip that control the boot process and the computer hardware are known as the basic input/output system (BIOS), sometimes called firmware.
• The ROM chip that contains the firmware is called the ROM BIOS chip.
• It is also referred to as ROM BIOS, or simply BIOS, and is usually marked “BIOS” on the motherboard.
• The responsibility of the BIOS is to serve as a liaison between the computer operating software and the various hardware components that support it.
• EPROM and EEPROM are ROM chips that can be erased and reprogrammed.
• Erasable programmable read-only memory (EPROM) is a special type of programmable read-only memory (PROM) that can be erased by shining ultraviolet light through a clear window on top of the chip.
• Flash ROMs are special EEPROM chips that have been developed as a result of advancements in EEPROM technology.
• Flash ROM holds the firmware, or BIOS, in most new systems.

• Expansion slots (sockets) are receptacles on the computer motherboard that accept printed circuit boards.
• Common expansion slots likely to be encountered include the following:
• Industry Standard Architecture (ISA )
• Peripheral Component Interconnect (PCI )
• Accelerated Graphics Port (AGP)

• Riser card – used when a computer is fully loaded to physically extends a slot so a chip or card can be plugged in. In low-profile, space-saving cases, cards are plugged into riser cards that reside parallel with the motherboard.

• Audio/Modem Riser (AMR)- a plug-in card for an Intel motherboard. The AMR evolved into the Communications and Networking Riser (CNR) card, which added LAN and home networking functions.
• The CNR is a 30-pin interface that accommodates two formats making various audio/modem and audio/network combinations possible.

• All the basic components of the computer are connected together by communication paths that are referred to as buses.
• There are three major system bus types that can be identified based on the type of information they carry.

1. address bus (a uni-directional pathway for data flow)
2. data bus (a bi-directional pathway for data flow)
3. control bus (carries the control and timing signals needed to coorinate the activities of the entire computer)